快3开奖结果查询

Televison & Video - Recent Questions, Troubleshooting & Support


see the procedure and fix it.God bless you
    • 1 Purchase or borrow an imported DVD. The only real reason to make your DVD player region-free is if you plan on watching imported DVDs.
    • 2 Locate your DVD player's brand name and model number. These can usually be found on the box the DVD player came in, or on a sticker close to the video inputs or on the bottom of the DVD player.
    • 3 Have your remote handy. You will need your remote to enter the input codes into your DVD player.
    • 4 Locate a Web site that can help you with the codes you need for your particular DVD player, since all DVD players have different codes. Try DVD Exploder or Video Help (see Resources below). Both have an extensive list of codes for almost every kind of DVD player manufactured.
    • 5 Enter your brand name and model number when prompted to do so on the Web site. If your particular model number is not available, try searching under the brand name. Sometimes you will be able to find a model number that is close to your DVD player's model number.
    • 6 Enter the codes into your DVD player with your remote. Be sure the DVD player's door is open-almost all codes require the door to be open.
    • 7 Test your imported DVD to see if it works, once you have entered your code into the DVD player.

Sylvania... | Answered 16 minutes ago


follow this steps and fix it. God bless you


No power
  1. Check if the power cord has been properly connected to the power outlet.
  2. Check if the main power has been switched on.
    (DVD player's power supply transformer could be burned out)
Screen is "frozen" or completely black, or Power button does not work
  1. Try turning the power off and wait 3 seconds before turning it on again.
  2. Make sure the TV and VCR (if connected) are set to the correct channel or line.
Does not play disc
  1. No disc. - Load a disc into the tray.
  2. Disc has been loaded upside down. Place the disc with the label side up.
  3. Disc region code does not match region code of the player.
  4. Disc type is not the correct type to play.
  5. Disc is damaged or dirty. Clean the disc or try another.
  6. Moisture may be condensed inside the unit. Remove the disc and the leave the power on for one or two hours.
No sound
  1. Check if the TV and Amplifier (if connected) is turned on and set correctly.
  2. Check if the TV, DVD player and Amplifier are connected properly.
  3. Make sure the TV, DVD player and Amplifier volume are not set to Mute.
  4. There will be no sound output during Reverse Play / Pause / Step / Slow / Search.
  5. If the DTS soundtrack is enabled in the DVD Disc Menu, but you are using Stereo Analog audio, the sound will not work. Try switching the soundtrack to Dolby 5.1 or PCM mode in the Disc Menu.
switching regions:
    • 1
Turn on your DVD player.
    • 2
Open the DVD player's main drive, also commonly called the DVD "tray." The region cannot be changed while a DVD is in the machine, so many DVD players require the tray to be open as an extra precaution.
    • 3
Push "Info" or "Setup" on your remote.
    • 4
Use the remote to select the "Region" option as indicated on your TV screen.
    • 5
Select "Region 9" to change the system to multiregion formatting. Regions 1 through 8 represent specific geographic locations and will not allow multiregion playback.

LG Televison &... | Answered 31 minutes ago


This is because the Blu-ray movie you play is not officially released one and it is a copy one of Cinavia-prrotected Blu-ray movie.
To get rid of the on your player, you can try which is a program that can be able to remove the Cinavia protection with ease. With this protection removing tool, you can easily get a 1:1 Cinavia-free Blu-ray copy.

Sanyo Televison... | Answered 34 minutes ago


What is the cheapest Blu-ray player that streams Netflix and YouTube?

Sharp BD-HP21U... | Answered 36 minutes ago


This will not fix your DVD player, but it will let you play your DVD. The easy, free way to bypass this problem is to play the movie on a laptop using VLC media player. Run an HDMI cable to your amplifier or your smart TV. VLC does not recognize Cinavia. This also works on any mkv movie copies.

Sanyo Televison... | Answered 2 hours ago


I can't get all my channels

Televison &... | Answered 6 hours ago


Remote control

Google

make model manual

Televison &... | Answered 8 hours ago


Are all of the sub-menus besides the clock unavailable or just the ones related to OTA (RF) signals? If it's just the OTA menus that are missing, change the source/input to TV. On all of my TVs, the channel scan option and related functions are blocked if the current input is not TV.

Changing the input/source depends on the TV. First make sure that an antenna or cable source on an RF (RG-59/RG-60 cable) is connected to the set. Next look for a Source or Input button on the original remote. Press this button. On some models, you navigate through the menu by pressing the Input/Source button repeatedly and then press OK to change the input. On other sets, you navigate with the arrow keys and then press OK. Some TVs may switch to the new source after a few seconds without any button presses; they don't need the OK button to be pressed. On a universal remote, you may find an Input/Source button but the button may not work with some codes for the manufacturer. (This can be frustrating since the basic functions (power, channel up/down, volume up/down) work; try a different code.)

Some TVs will also have an Input/Source button on the TV. This will work like the button on the remote. Use the Select button for the OK button. A few TVs have the option inside the on-screen menu. Press Menu and then look for a source option in a Tools or Setup menu.

I hope this helps. I have never had a TV where only the Clock menu is available. If that is the case with your TV, I don't know of a solution.

Cindy Wells

Televison &... | Answered 9 hours ago


huge TV
it need service, you have no tools are parts.
all you can do is the reset , shown in your manual
at samsung.com

Samsung... | Answered 11 hours ago


I too have the same problem with the DC-DC board on the Sharp AVC. But I didn't spend the $134 for a replacement board (MCM or Newark).
Instead, I used the reflow technique by placing the circuit board in the oven for 7 minutes at 475F. You need to cover the plastic header connectors (about 7 of them) with foils to protect them from direct heat (and melt). Take the board out of the oven and give a little pressure on all the ICs while the board is hot. Let it cool down and voila! The TV is working again...

Sharp Aquos... | Answered 11 hours ago


Working Remote Control Codes For Panasonic TVs
  • Panasonic HDTV Codes :1140,1169,1170,1194,1233,1234,1331,1336,1410,1417,1442.
  • Panasonic TV Codes: 1003,1010,1049,1053,1096,1123,1152,1231,1289,1292,1295.

Panasonic... | Answered 12 hours ago


If you have had the unit since new and have never programmed a new code into the memory, the default code should restore it.

The default code is usually found in the instruction book/user guide.

Panasonic... | Answered 13 hours ago


Provly need to call panasonic if udont hav the list w the remote

Panasonic... | Answered 13 hours ago


Earlier FIXYA questions suggeted obtaining drivers.

Web page with drivers to download was saved by Internet Archive Wayback Machine even though original web page was not available.



Depending upon the version of Windows, drivers may not be available.

Encore ENLTV-FM... | Answered 15 hours ago

Not finding what you are looking for?

652,287 questions posted快3开奖结果查询

Ask a Question

快3开奖结果查询Usually answered in minutes!

Popular Products

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

Cindy Wells

快3开奖结果查询Level 3 Expert

快3开奖结果查询6073 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...